Standard Models
----------------------------------------------------------------------------
*Feature* *Specification*
Panel type 17-inch Active Matrix-TFT liquid crystal display
panel
Viewable image area 17 inches (43.2 centimeters)
(diagonal)
Viewing angle 150 (75/75) degrees horizontal
(typical) 40 (70/70) degrees vertical
Brightness (typical) 250 Candelas per square meter
Contrast ratio 400:1
(typical)
Pixel pitch 0.264 millimeters
Pixel clock rate 140 MHz
Response time < 40 milliseconds
(typical)
Screen surface Antiglare and antistatic coating
Scanning frequency 30 to 81 kilohertz (horizontal)
56 to 76 kilohertz (vertical)
White temperature 5800, 6500, and 9300 degrees Kelvin (user modes
selected through OSD controls)
_Top of Page_
*Interface Specifications*
Video input Analog R, G, and B separate horizontal and vertical
synchronization
Dual input (VGA and DVI) that consists of one analog
15-pin D-sub and one DVI-D connector
Display engine Third-generation Super XGA (SXGA)
Native resolution SXGA (1,280 x 1,024 pixels R, G, and B)
Supported resolution All VESA modes up to 1,280 x 1,024 pixels at a
modes vertical sync rate of 75 Hz
1,600 x 1,200 pixels at a vertical sync rate of 60 Hz
(fail-safe mode)
Recommended resolution 1,280 x 1,024 pixels at a vertical sync rate of 60 Hz
Supported sync modes Separate sync (HSYNC / VSYNC); Composite sync;
Sync-on-Green
True color support Yes (> 16 million colors)
Auto-configuration Self auto-configuration or hot-key configuration for
display position and Clock and Phase (VGA specific)
Video-scaler Full-screen and scale-down capability
Factory preset modes 13
User programmable 14
modes
Input impedance 75 ohms +/- 5 %
_Top of Page_
----------------------------------------------------------------------------
| |
