Description
----------------------------------------------------------------------------
Feature Specification
Option Part 153543-B21
Number
Spare Part Number 170024-001
Assembly Part 011227-001
Number
Plug and Play Fully compliant with 2.2 PCI specifications; this upgrade
module automatically configures its I/O addresses and
interrupt (IRQ - INTA) settings.
Communications
Processor Chipset
Intel 82543GC MAC; (Half or Full Duplex - auto
negotiated)
Broadcom PHYs
Ports Single, RJ45 connector
Speed 10/100/1000Mps Ethernet, auto-negotiated
Cabling CAT 5 or higher, UTP (2 or 4 pair), Up to 100 meters (328
feet)
LED Indicators
Link Integrity
Network Activity
Network Speed
Kit Contents
NC7132 Upgrade Module
Software and Documentation CD Release 6.1 containing
Drivers, User Guide, and Installatiopn and Diagnostic
Utilities
Quick Install Card
Product Quality Statement
Product Warranty Statement
Advanced Features
Network Fault Tolerance
PCI Hot Plug
Port Bonding / Teaming; TLB-Transmit Load Balancing
(formerely ALB, Adaptive Load Balancing)
Port Bonding / Teaming; SLB - Switch Assisted Load
Balancing (formerly FEC, GEC - Fast/Gigabit
EtherChannel)
Specifications
L x W: 5.75 x 3.9 inches / 14.5 x 9.9 cm
Dimensions
Communications
Processor Intel 82543GC MAC; (Half or Full Duplex - auto
Chipset negotiated)
Broadcom PHYs
PCI 64-bit or 32-bit, 33 MHz Bus-Master, auto-negotiating
Bus interface
64KB
On-Board Memory
Compliance
Both ports IEEE 802.3p, 802.3z and 802.3ab 1000Mbps
over UTP (Gigabit over copper)
PCI 2.2
ACPI v1.20a
RJ-45
Connector
INTA
Interrupt
Request Level
1.0A@+5.0V
Power
requirements
100 Meters
Distance
FCC Class B
Emissions
standards
CE Mark
Safety
Compliance
CAT 5 or higher, UTP (2 or 4 pair), Up to 100 meters (328
Supported feet)
cabling
Miscellaneous
64-bit addresses for systems with more than 4.0GB of
physical memory
64-bit PCI host interface commpliant with PCI 2.2
Command usage optimization for advanced PCI commands
(MWI and memory reads)
Software-controlled global reset bit (resets
everything except PCI configuration registers)
Standard certifications for supported OS's
Standard EMI and Safety test certifications for office
environments worldwide
0 to 55C / 32 to 131F
Operating
temperature
10% to 90% (noncondensing)
Operating
humidity
-65 to 85C / -85 to 185F
Non-operating
temperature
5% to 95% (noncondensing)
Non-operating
humidity
Operating System
Support
Windows 2000 DataCenter, Windows 2000, NT 4.0
IA-64
Novell NetWare 3.2, 4.11, 5.x Server
SCO UnixWare 7.x
SCO OpenServer 5.0
NDIS 2 for DOS unattended install
Linux
16-bit ODI
Software Support
SmartStart 5.0 or greater
CIM or CIM EX
Event Logging (IML)
Warranty The NC7132 is covered by the Compaq Limited Lifetime
information Warranty for parts only. It is covered by the same length
of time of the warranty of the server that it is installed
in or 1-Year parts which ever is greater.
Contact Compaq Networking Technical Support at
1-800-386-2172 for details.
_Top of page_
Description
===========
The Compaq NC7132 is a single port, 10/100/1000Mbps, copper gigabit, upgrade
module for the NC3131 and NC3134 NICs also from Compaq. It is the industry's
only modular designed upgrade providing copper gigabit capabilities without
sacrificing an additional PCI slot. See the table above for more details.
_Top of page_
----------------------------------------------------------------------------
| 011227-001
153543-B21
170024-001
|
