Product Details

EtherWORKS 1000 PCI Adapter - *Transfers data at a rate of one gigabit per second*
PCI clock 33/66 MHz
PCI data burst transfer rate 132 MB/s
PCI data/address 32/64 bit
PCI modes Master/slave
1000BASE-SX 2 Gb/s (full-duplex mode)
1000BASE-TA
Standards

Gigabit Ethernet (IEEE 802.3z
standard)

Flow Control (IEEE 802.3z)

Logical Link Control (IEEE 802.2)

SNMP

Interoperability Interoperates with gigabit Ethernet
equipment assuming:

Standard Ethernet minimum and
maximum frame size (64 to 1518
bytes)

Standard Ethernet frame format

1000BASE-SX link distance Dependent upon fiber specifications
characteristics (IEEE 802.3z standard)
10/100/1000BASE-T link distance Dependant on network speed
characteristics (IEEE 802.3z standard)

Description
===========
The DEGPA incorporates a new technology that transfers data at a rate of one
gigabit per second - ten times the rate of a Fast Ethernet adapter. This
adapter targets the increased congestion experienced at the backbone and
server levels by today's networks. The DEGPA provides an upgrade path for
high-end servers and workstations that require more local area network (LAN)
bandwidth than either Fast Ethernet or FDDI can provide.
Features
========
Full-duplex gigabit Ethernet interface (IEEE 802.3z standard)
AutoNegotiation set as the default. Refer to the AutoNegotiation
(Link) section in Chapter 2 of Installation Manual EK-DEGPA-IN for more
information
Standard Ethernet frame size (1518 bytes)
Capable of supporting jumbo frame sizes (up to 9000 bytes)
Dual intelligent DMA channels
Adaptive interrupt frequency (minimizes system overhead and
latency; adapts to traffic load)
ASIC with on-chip MAC and dual RISC processors
PCI Local Bus Revision 2.1 compliant
33/66 MHz, 32- or 64-bit PCI bus master with adaptive DMA
Universal dual voltage bus signaling (3.3 V and 5.0 V)
Duplex SC fiber-optic multimode connector (DEGPA-SA)
Link Characteristics
====================
The following table shows the 1000BASE-SX link distance characteristics
(IEEE 802.3z standard) for the DEGPA-SA:
Fiber Bandwidth Maximum Length
62.5/125 160 MHz 220 meters
200 MHz 275 meters
50/125 400 MHz 500 meters
500 MHz 550 meters

The following table shows the 10/100/1000BASE-T link distance
characteristics (IEEE 802.3z standard) for the DEGPA-TA:
Port Type Cable Type Maximum Distance
10BASE-T Catagory 3, 4, 5 UTP 100 meters (325 feet)
100/1000BASE-T Catagory 5 UTP 100 meters (325 feet)

----------------------------------------------------------------------------
EK-DEGPA-IN
Page 1 -

3prime solutions for all your Digital requirements

     
 


HP is a registered trademark