Overview 1 3
4
5
6
7
8
Single Controller Front View
Reference # Identifier
1 Redundant Controller Slot Blank
2 Controller
3 Display Buttons
4 Display
5 Display indicators
Open Card Completely 6 Status indicators
7
Before Beginning Power Switch
8
Installation Procedures Drive Bay(s)
mart Array Cluster Storage
2001 Compaq Computer Corporation.
Front View (Dual Controller)
Compaq, the Compaq logo, ProLiant, and ROMPaq Registered in U. S. Patent
and Trademark Office.
Compaq shall not be liable for technical or editorial errors or omissions
contained herein. The information in this document is provided "as is" without
warranty of any kind and is subject to change without notice. The warranties
for Compaq products are set forth in the express limited warranty statements
accompanying such products. Nothing herein should be construed as
constituting an additional warranty.
1 2
Printed in the U.S.A.
3
4
5
6
7
Dual Controller Front View
Reference # Identifier
1 Controllers
2 Display Buttons
3S Display
4
Smart Array Cluster Storage Installation Overview Display indicators
5
First Edition (October 2001)
Status indicators
Part Number: 240330-001
6
Compaq Computer Corporation Power Switch
7 Drive Bay(s)
24 0 3 3 0- 0 0 1
2.
Smart Array Cluster Storage Smart Array Cluster Storage
Front View (Single Controller) Back View
IM
2
m
Co
1 3
4
3.
5
6
1
7
2
IM
3
6
8 5 4
on
Single Controller Front View
Smart Array Cluster Storage Back View
Reference # Identifier
1 Reference # Identifier
Redundant Controller Slot Blank
1
2 Power Supply/Blower indicators
Controller
2
3 Power Supply/Blower Assemblies
Display Buttons
3
4 SCSI port A
Display
4
5 SCSI port B
Display indicators
5
6 Environmental Monitoring Unit indicators
Status indicators
6
7 Environmental Monitoring Unit (EMU)
Power Switch
8 C
Drive Bay(s)
C
G
P/
Smart Array Cluster Storage mart Array Cluster Storage
Front View (Dual Controller) Configuration
C
C
In
P/
1
3
C
1 2
C
3
In
4
P/
2
5
C
O
6
Smart Array Cluster Storage Configuration In
Reference # Identifier P/
1
7
Smart Array Cluster Storage system
2 SCSI Cables
Dual Controller Front View
3
Reference # Identifier Servers
1 Controllers
2 Display Buttons
S Installation Overview
3 Display
4 Display indicators
To install the Compaq Smart Array Cluster Storage components: Y
5 Status indicators w
6 1. Install the Smart Array Cluster Storage system in a rack
Power Switch
7 following the instructions found in your rack installation
Drive Bay(s)
documentation.
2. If your server does not have an integrated Smart Array 5i series
Smart Array Cluster Storage Controller, then connect with a Smart Array 532 PCI Controller
(sold separately). Attach to the Smart Array Cluster Storage
Back View system' s I/O SCSI ports using the appropriate length of SCSI
cable.
IMPORTANT: Servers used with the Smart Array Cluster Storage system
must connect to a Smart Array 5i series Controller or a Smart Array 532 PCI
Controller.
3
4
3. Apply power to the equipment in the following order:
5
6
WARNING: To reduce the risk of personal injury from electric shock
1
or damage to the equipment plug the power cord into a grounded
(earthed) electrical outlet.
7
2
IMPORTANT: You must power on the Smart Array Cluster Storage before powering
3
6
5 4
on the servers.
a. Apply power to the Smart Array Cluster Storage. After
Smart Array Cluster Storage Back View
powering on, wait until the message " Compaq
Reference # Identifier
1 Startup Complete" appears on your display. This process
Power Supply/Blower indicators
may take up to two minutes.
2 Power Supply/Blower Assemblies
3 b. Power up the server(s).
SCSI port A
4 SCSI port B
5 Documents
Environmental Monitoring Unit indicators
6 Environmental Monitoring Unit (EMU)
Compaq Smart Array This book contains information about
Cluster Storage User the Compaq Smart Array Cluster
Guide Storage, including installation,
P/N 240333 hardware configuration, and setup
Smart Array Cluster Storage instructions.
Configuration
Compaq Smart Array This color overview provides a visual
Cluster Storage representation of the complete
Installation Overview Compaq Smart Array Cluster Storage.
P/N 240330 Basic installation steps and features of
the storage system are included.
1
3
This folded pictorial sheet contains
Compaq Redundant
2
instructions for the installation of a
Controller Option Kit
3
redundant Controller.
Installation Instructions
4
P/N 230937
2
5
This pictorial sheet contains
Compaq 128MB DIMM
instructions for the installation of
Option Kit Installation
6
Smart Array Cluster Storage Configuration 128MB DIMM. The title of your
Instructions
Reference # Identifier document may not match this title, as
P/N 187192
1 other Compaq documents use these
Smart Array Cluster Storage system
2 instructions.
SCSI Cables
3 Servers
Installation Overview Getting Help
To install the Compaq Smart Array Cluster Storage components: You can access Compaq support on the Internet at
www.compaq.com
1. Install the Smart Array Cluster Storage system in a rack
following the instructions found in your rack installation
documentation.
2. If your server does not have an integrated Smart Array 5i series
Controller, then connect with a Smart Array 532 PCI Controller
(sold separately). Attach to the Smart Array Cluster Storage
system' s I/O SCSI ports using the appropriate length of SCSI
cable.
IMPORTANT: Servers used with the Smart Array Cluster Storage system
must connect to a Smart Array 5i series Controller or a Smart Array 532 PCI
Controller.
3. Apply power to the equipment in the following order:
WARNING: To reduce the risk of personal injury from electric shock
or damage to the equipment plug the power cord into a grounded
(earthed) electrical outlet.
IMPORTANT: You must power on the Smart Array Cluster Storage before powering
on the servers.
a. Apply power to the Smart Array Cluster Storage. After
powering on, wait until the message " Compaq
Startup Complete" appears on your display. This process
may take up to two minutes.
b. Power up the server(s).
Documents
Compaq Smart Array This book contains information about
Cluster Storage User the Compaq Smart Array Cluster
Guide Storage, including installation,
P/N 240333 hardware configuration, and setup
instructions.
Compaq Smart Array This color overview provides a visual
Cluster Storage representation of the complete
Installation Overview Compaq Smart Array Cluster Storage.
P/N 240330 Basic installation steps and features of
the storage system are included.
This folded pictorial sheet contains
Compaq Redundant
instructions for the installation of a
Controller Option Kit
redundant Controller.
Installation Instructions
P/N 230937
This pictorial sheet contains
Compaq 128MB DIMM
instructions for the installation of
Option Kit Installation
128MB DIMM. The title of your
Instructions
document may not match this title, as
P/N 187192
other Compaq documents use these
instructions.
Getting Help
You can access Compaq support on the Internet at
www.compaq.com
| 240330-001
|
