OVERVIEW
Compaq's DRTape Disaster Recovery Utility is a disaster recovery tool which replaces the traditional recovery methods associated with manual
downloads from floppy or CD-ROM. DRTape is a firmware driven software utility that provides a disaster recovery solution for Compaq ProLiant servers.
Embedded in the firmware of each supported tape device, DRTape uses Compaq tape drives to emulate bootable drive devices, similar to floppy and CD-
ROM drives. When implemented, DRTape can provide for the complete recovery of server software and data. The recovery process requires the use of
only one tape cartridge, in conjunction with the Compaq SmartStart CD, and can typically be completed in less than an hour.
DRTape v1.3 is the latest release of Compaq's tape-based disaster recovery tool, adding support for Compaq's 40/80-GB DLT tape drive as well as new
support for the Windows 2000 operating system on all DAT and AIT tape drives and the 20/40-GB DAT AutoLoader.
K E Y FEAT U R E S
DRTape is a complete disaster recovery tool, restoring your Compaq server's operating system, software applications, and data. Manual
downloads using multiple CD's or floppy disks to rebuild your server are no longer required.
DRTape disaster recovery utility is embedded in your tape drive firmware and supported ISV software application. Using SmartStart to
initialize your server, no other drive media are required other than your designated bootable DRTape tape cartridge.
Completely restores all software and data from one bootable tape cartridge. This provides a simpler, lower cost solution for managing your
disaster recovery strategy.
Depending on the size of your data set, DRTape can typically restore your system software and data in less than an hour. By reducing your
restore window by more than 50%, DRTape can significantly reduce the costs associated with downtime and lost data.
Supported by a wide variety of Compaq tape devices, ProLiant servers, and SCSI host bus adapters. Compaq customers can implement
DRTape with the industry's leading server and data protection products.
Qualified behind VERITAS Backup Exec and CA ARCserve 2000. Rigorous testing and qualification on the industry's leading backup
applications ensures compatibility with your Compaq tape devices.
PRODUCT HIGHLIGHTS
Distribution
DRTape is a software utility embedded in the firmware of supported tape devices. Compaq customers can acquire the DRTape utility by purchasing
DRTape-ready Compaq tape devices or by upgrading the tape drive firmware to revisions that support the DRTape Disaster Recovery Utility.
Tape Device Support
DRTape is supported by a wide variety of Compaq tape devices including DAT, AIT, DLT (40/80-GB) and SDLT tape drives, as well as the DAT 8-
cassette AutoLoaders.
Tape Backup Application Support and Requirements
DRTape is supported by both VERITAS Backup Exec 8.6 for NT/2000 and CA ARCserve 2000 for NT/2000. Implementing DRTape requires the
purchase and installation of a DRTape Disaster Recovery software module from your selected ISV. Please contact the appropriate ISV for further
information regarding the required disaster recovery module.
Compaq DRTape Compatibility Matrix
Further information regarding supported hardware and software platforms, as well as required firmware releases, can be found in the "Compaq DRTape
Compatibilty Matrix" located on the Compaq.com website.
Disaster Recovery Preparation
Using DRTape reduces the preparation process for disaster recovery to only two steps:
Using both the ISV software and the Windows NT/2000 CD, a bootable image of the target server is created.
Using the appropriate tape media, a complete backup of the server's software and data is created. This cartridge, referred to as the DRTape backup
cartridge, will be used to restore the system in the event that a disaster occurs.
DA-10904 World Wide -- Version 3 -- November 27, 2001 1
QuickSpecs
StorageWorks by Compaq
DRTape v1.3
PRODUCT HIGHLIGHTS (continued)
Server Recovery using DRTape
Implementing DRTape to recover a server requires only two steps:
After replacing damaged or failed parts (if required), initialize the ProLiant server using the Compaq SmartStart CD.
When prompted, insert the appropriate DRTape backup cartridge (write-protected) and follow the on-screen instructions.
(Further instructions regarding the use of DRTape with a Compaq tape drive or tape autoloader are provided in the "DRTape User's Guide")
Depending on the size of the data set, server recovery can typically be completed in less than one hour using on one DRTape backup cartridge.
S Y S T E M RE Q U I R E M E N T S & SUP P O R T
Tape Drives* DAT: DAT 12/24 GB, DAT 20/40 GB
Tape Device Support
AIT: AIT 35 GB, AIT 35 GB LVD, AIT 50 GB
DLT: 40/80 GB DLT
SDLT: 110/220 GB SDLT
*Note: DRTape does not support Compaq Hot-Plug tape drives
Tape Subsystems SCSI Storage Expander II, 3U RM Storage Enclosure, DLT Tape Array III
(Support based on installed drives; RAID configurations not supported)
Tape Automation 12/24 GB DAT 8-Cassette AutoLoader (Windows NT only)
20/40 GB DAT 8-Cassette AutoLoader
ProLiant Servers
Server Support PL: 1600, 1850R, 5500, 6400R, 7000, 8000
DL: 320, 360, 380, 580
ML: 350, 370, 530, 570
Embedded Integrated Dual Channel Wide Ultra2 SCSI Adapter
SCSI Controller Support
Host Bus Adapter** 64-Bit/66-MHz S/Channel Wide Ultra3 SCSI Adapter
64-Bit/66-MHz D/Channel Wide Ultra3 SCSI Adapter
Wide-Ultra SCSI-3 Adapter
64-Bit Ultra 2 SCSI Adapter
**Note: DRTape does not support Compaq Smart Array Controllers
Microsoft Windows NT 4.0 with Service Pack 5.0 or higher installed
OS Support
Microsoft Windows 2000 (DAT, AIT, and DAT 20/40 GB AutoLoader only)
VERITAS Backup Exec 8.6 for Windows NT/2000
Backup Application Software
CA ARCserve 2000 for NT/2000
Note: Please see "Compaq DRTape Compatibility Matrix" at
http://www.compaq.com/products/storageworks/drtape/compatibility.html
for further information regarding the minimum requirements for operating DRTape
Note: This Web site is available in English only.
DA-10904 World Wide -- Version 3 -- November 27, 2001 2
QuickSpecs
StorageWorks by Compaq
DRTape v1.3
SERVICE & SUPPORT, CAREPAQ WARRANTY INFORMATION
AND
Software Product Services
Stand-alone telephone support
Rights to new license version
Media and documentation updates
Hardware Product Services
Installation services
On-site maintenance (includes warranty support)
Response time upgrades during the warranty period
Post-warranty coverage
RAID setup and performance consulting via statement of work
For additional hardware installation and maintenance information, please contact your local Customer Services Department
Warranty Upgrade Options
Response - Upgrade on-site response from next business day to same day 4-hours
Coverage - Extend hours of coverage from 5 days x 9 hours to 7 days x 24 hours
Duration - Select duration of coverage for a period of 1year or Multiyear
CarePAQ Information
Sample part numbers:
FP-EM0**-36, (or FP-WARPL-36) 3 year, uplift to 5 x 9, Next Day Response
FM-EM1**-36, (or FP-PRIOR-36) 3 year, uplift to 5 x 9, 4-hour Response
FP-EM2**-36, (0r FP-PRI24-36) 3 year, uplift to 7 x 24, 4-hour Response
** represents a two-digit, product-specific code
CarePAQ is defined as an upgrade to the product warranty attribute, available for a specific duration and hours of coverage.
CarePAQ is not available for less than the product's warranty duration.
CarePAQ is available for sale anytime during the warranty period for most products, but the commencement date will be the same as the Warranty
Start Date (delivery date to end user customer). Proof of purchase may be required.
CarePAQ services are prepaid.
For additional CarePAQ (hardware & software) information, as well as orderable part numbers, please refer to the URL listed below:
http://emea-inline.eur.compaq.com/csd/smb/prioritysupportmaterial.asp
DA-10904 World Wide -- Version 3 -- November 27, 2001 3
| FP-PRI24-36
FP-PRIOR-36
FP-WARPL-36
|
