First Edition (April 2000)
Part Number 173868-001
Compaq Computer Corporation
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: A-frnt.DOC Last Saved On: 1/18/00 9:21 AM
Notice
The information in this publication is subject to change without notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR
EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN, NOR FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR
USE OF THIS MATERIAL. THIS INFORMATION IS PROVIDED "AS IS" AND COMPAQ
COMPUTER CORPORATION DISCLAIMS ANY WARRANTIES, EXPRESS, IMPLIED OR
STATUTORY AND EXPRESSLY DISCLAIMS THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, GOOD TITLE AND AGAINST
INFRINGEMENT.
This publication contains information protected by copyright. No part of this publication may be
photocopied or reproduced in any form without prior written consent from Compaq Computer
Corporation.
2000 Compaq Computer Corporation.
All rights reserved. Printed in the U.S.A.
The software described in this guide is furnished under a license agreement or nondisclosure agreement.
The software may be used or copied only in accordance with the terms of the agreement.
Compaq Insight Manager, ProLiant, ROMPaq, SmartStart, NetFlex, registered United States Patent and
Trademark Office.
Netelligent and SoftPaq are trademarks and/or service marks of Compaq Information Technologies
Group, L.P.
Microsoft, MS-DOS, Windows, and Windows NT are registered trademarks of Microsoft Corporation.
Pentium is a registered trademark of Intel Corporation.
Other product names mentioned herein may be trademarks and/or registered trademarks of their
respective companies.
Compaq ProLiant ML330 Setup and Installation Guide
First Edition (April 2000)
Part Number 173868-001
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: A-frnt.DOC Last Saved On: 1/18/00 9:21 AM
Contents
About This Guide
Text Conventions.......................................................................................................vii
Symbols in Text....................................................................................................... viii
Symbols on Equipment...............................................................................................ix
Getting Help ................................................................................................................ x
Compaq Technical Support .................................................................................. x
Compaq Website..................................................................................................xi
Compaq Authorized Reseller...............................................................................xi
Chapter 1
Server Features
Standard Features..................................................................................................... 1-2
Front Panel Components .................................................................................. 1-3
Rear Panel Connectors...................................................................................... 1-5
System Board Components............................................................................... 1-6
Processors and System Memory....................................................................... 1-7
Expansion Slots ................................................................................................ 1-7
Disk Controller ................................................................................................. 1-7
Network Controller........................................................................................... 1-7
Ports/Connectors............................................................................................... 1-7
BIOS ................................................................................................................. 1-8
Server Feature Board Components ................................................................... 1-8
Power Supply.................................................................................................... 1-9
Warranty ........................................................................................................... 1-9
Server Configuration and Management ................................................................... 1-9
BIOS Setup Utility.......................................................................................... 1-10
Compaq SmartStart and Support Software..................................................... 1-10
Compaq Insight Manager ............................................................................... 1-10
Diagnostic Tools............................................................................................. 1-11
Security Features ................................................................................................... 1-11
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: A-frnt.DOC Last Saved On: 1/18/00 9:21 AM
iv Compaq ProLiant ML330 Setup and Installation Guide
Chapter 2
Overview of Server Installation
Selecting a Site......................................................................................................... 2-2
Unpacking the Server............................................................................................... 2-2
Locating Materials ................................................................................................... 2-2
Connecting the Power Cord and Peripheral Devices ............................................... 2-3
Installation Sequence ............................................................................................... 2-4
Preconfigured Operating System ...................................................................... 2-4
Operating System Purchased Separately........................................................... 2-6
Configuring the Server............................................................................................. 2-7
Chapter 3
Hardware Options Installation
Shutting Down the Server ........................................................................................ 3-2
Removing the Front Bezel ....................................................................................... 3-3
Removing the Access Panel ..................................................................................... 3-4
Removing the Bezel Blanks ..................................................................................... 3-5
Removing a Drive Tray............................................................................................ 3-6
Storage Devices ....................................................................................................... 3-7
Drive Positions.................................................................................................. 3-7
Installing a Hard Drive...................................................................................... 3-8
Removing a Hard Drive .................................................................................. 3-10
Installing a Hard Drive in a Removable Media Bay ....................................... 3-11
Installing a Tape Drive or Other Device in a Removable Media Bay............. 3-13
Removing a Tape Drive or Other Device from the Removable Media Bay ... 3-15
Expansion Slots...................................................................................................... 3-17
Installing an Expansion Board ........................................................................ 3-18
Configuring PCI Devices................................................................................ 3-19
BIOS Setup Utility.......................................................................................... 3-19
Memory Modules................................................................................................... 3-20
Technical Information and Important Guidelines for DIMM Installation ...... 3-20
Installing a Memory Module .......................................................................... 3-21
Removing a Memory Module ......................................................................... 3-23
Replacing the Battery............................................................................................. 3-24
Replacing the System Board Battery .............................................................. 3-24
Replacing the Server Feature Board Battery................................................... 3-26
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: A-frnt.DOC Last Saved On: 1/18/00 9:21 AM
Contents v
Chapter 4
Cabling Guidelines
Storage Device Installation Guidelines.................................................................... 4-1
Identifying the Internal SCSI Components....................................................... 4-2
Identifying and Connecting a Fast SCSI-2 Device (Narrow) ........................... 4-4
Connecting an Integrated Wide-Ultra2 SCSI Controller to an Internal SCSI
Hard Drive or Other SCSI Device .................................................................... 4-5
Connecting Internal Hard Drives to Smart Array Controllers .......................... 4-6
Connecting the Server Management Information Cable (SMIC) ..................... 4-8
Chapter 5
Server Configuration and Utilities
BIOS Setup Utility................................................................................................... 5-2
Navigating the BIOS Setup Utility ................................................................... 5-2
Using the BIOS Setup Utility ........................................................................... 5-2
ROMPaq .................................................................................................................. 5-7
SmartStart ................................................................................................................ 5-8
Compaq Insight Manager......................................................................................... 5-8
SmartStart Diskette Builder ..................................................................................... 5-9
Compaq Survey Utility ............................................................................................ 5-9
Installing Survey............................................................................................. 5-10
Running Survey .............................................................................................. 5-10
Compaq Diagnostics Utility................................................................................... 5-11
Automatic Server Recovery (ASR) ....................................................................... 5-11
Appendix A
Regulatory Compliance Notices
Regulatory Compliance Identification Numbers .....................................................A-1
Communications Commission Notice .....................................................................A-1
Class A Equipment ..................................................................................................A-2
Class B Equipment ..................................................................................................A-2
Declaration of Conformity for Products Marked with the FCC Logo -
United States Only............................................................................................A-3
Modifications ....................................................................................................A-3
Cables ...............................................................................................................A-3
Mouse Compliance Statement ..........................................................................A-4
Canadian Notice (Avis Canadien) ...........................................................................A-4
Class A Equipment ...........................................................................................A-4
Class B Equipment ...........................................................................................A-4
European Union Notice ...........................................................................................A-4
Japanese Notice .......................................................................................................A-5
Taiwanese Notice.....................................................................................................A-5
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: A-frnt.DOC Last Saved On: 1/18/00 9:21 AM
vi Compaq ProLiant ML330 Setup and Installation Guide
Regulatory Compliance Notices
continued
Battery Replacement Notice ................................................................................... A-6
Laser Compliance ................................................................................................... A-7
Power Cords............................................................................................................ A-8
Appendix B
Electrostatic Discharge
Grounding Methods .................................................................................................B-2
Appendix C
Switches and Jumpers
Switch Settings.........................................................................................................C-1
System Board Switch Settings ..........................................................................C-2
Server Feature Board Switch Settings ..............................................................C-3
SCSI Device Jumper Settings ..................................................................................C-3
Index
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: A-frnt.DOC Last Saved On: 1/18/00 9:21 AM
About This Guide
This guide is designed to be used as step-by-step instructions for installation
and as a reference for operation, troubleshooting, and future upgrades.
Text Conventions
This document uses the following conventions to distinguish elements of text:
Keys display in boldface. A plus sign (+) between
Keys
two keys indicates that they should be pressed
simultaneously.
USER INPUT User input displays in a different typeface and in
uppercase.
FILENAMES File names display in uppercase italics.
Menu Options, These elements display in initial capital letters.
Command Names,
Dialog Box Names
COMMANDS, These elements display in uppercase.
DIRECTORY NAMES,
and DRIVE NAMES
When you are instructed to type information, type
Type
the information without pressing the Enter key.
without Enter
When you are instructed to enter information, type
Enter
the information and then press the Enter key.
Enter
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: A-frnt.DOC Last Saved On: 1/18/00 9:21 AM
viii Compaq ProLiant ML330 Setup and Installation Guide
Symbols in Text
These symbols may be found in the text of this guide. They have the following
meanings:
WARNING: Text set off in this manner indicates that failure to follow directions
in the warning could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions
could result in damage to equipment or loss of information.
IMPORTANT: Text set off in this manner presents clarifying information or specific
instructions.
NOTE: Text set off in this manner presents commentary, sidelights, or interesting points
of information.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: A-frnt.DOC Last Saved On: 1/18/00 9:21 AM
About This Guide ix
Symbols on Equipment
These icons may be located on equipment in areas where hazardous conditions
may exist:
This symbol, in conjunction with any of the following symbols, indicates the
presence of a potential hazard.
WARNINGS: The potential for injury exists if warnings are not observed.
Consult your documentation for specific details.
This symbol indicates the presence of hazardous energy circuits or electric
shock hazards. Refer all servicing to qualified personnel.
WARNING: To reduce the risk of injury from electric shock hazards, do not
open this enclosure. Refer all maintenance, upgrades, and servicing to
qualified personnel.
This symbol indicates the presence of hazardous electric shock hazards. The
area contains no user or field serviceable parts. Do not open for any reason.
WARNING: To reduce the risk of injury from electric shock hazards, do not
open this enclosure.
This symbol on an RJ-45 receptacle indicates a network interface connection.
WARNING: To reduce the risk of electric shock, fire, or damage to the
equipment, do not plug telephone or telecommunications connectors into this
receptacle.
This symbol indicates the presence of a hot surface or hot component. If this
surface is contacted, the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow the
surface to cool before touching.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: A-frnt.DOC Last Saved On: 1/18/00 9:21 AM
x Compaq ProLiant ML330 Setup and Installation Guide
Getting Help
If you have a problem and have exhausted the information in this guide, you
can get further information and other help in the following locations.
Compaq Technical Support
In North America, call the Compaq Technical Phone Support Center at
1-800-OK-COMPAQ. This service is available 24 hours a day, 7 days a week.
For continuous quality improvement, calls may be recorded or monitored.
Outside North America, call the nearest Compaq Technical Support Phone
Center. Telephone numbers for worldwide Technical Support Centers are
listed on the Compaq website. Access the Compaq website by logging on to
the Internet:
http://www.compaq.com
Be sure to have the following information available before you call Compaq:
Technical support registration number (if applicable)
s
Product serial number
s
Product model name and numbers
s
Applicable error messages
s
Add-on boards or hardware
s
Third-party hardware or software
s
Operating system type and revision level
s
Detailed, specific questions
s
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: A-frnt.DOC Last Saved On: 1/18/00 9:21 AM
About This Guide xi
Compaq Website
The Compaq website has information on this product as well as the latest
drivers and Flash ROM images. You can access the Compaq website by
logging on to the Internet:
http://www.compaq.com
Compaq Authorized Reseller
For the name of your nearest Compaq authorized reseller:
In the United States, call 1-800-345-1518.
s
In Canada, call 1-800-263-5868.
s
Elsewhere, see the Compaq website for locations and telephone
s
numbers:
http://www.compaq.com
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: A-frnt.DOC Last Saved On: 1/18/00 9:21 AM
1
Chapter
Server Features
The Compaq ProLiant ML330 delivers the latest performance features at an
affordable price. As the primary server in a small-to-medium business, the
ProLiant ML330 is an ideal server for applications such as file/print, simple
database, and remote access. This business-critical server delivers Intel
Pentium III technology, Error Checking and Correcting Memory, easy
expandability, and leading server management tools such as Compaq Insight
Manager and BIOS Setup Utility. Server features include:
Intel 256-KB Pentium III processor with 133-MHz front side system bus
s
64 MB of PC133-MHz registered, Error Checking and Correcting
s
(ECC), Synchronous Dynamic Random Access Memory (SDRAM)
DIMMs, upgradable to 2 GB
Capacity for five 18 GB hard drives for a maximum of 90 GB of
s
internal storage
Four removable media bays (three available)
s
IDE CD-ROM drive
s
1.44-MB, 3.5-inch diskette drive
s
Integrated Single Channel Wide-Ultra2 SCSI Controller
s
Integrated PCI 10/100 Wake-On-LAN NIC
s
Integrated ATI Rage XL Video Controller
s
Three available 32-bit PCI slots and two 64-bit PCI slots
s
CE Mark compliant power supply
s
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: b-ch1 Server Features.doc Last Saved On: 1/17/00 4:06 PM
1-2 Compaq ProLiant ML330 Setup and Installation Guide
330
ML
Figure 1-1. Compaq ProLiant ML330
Standard Features
The following features are standard on the ProLiant ML330, unless
otherwise noted.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: b-ch1 Server Features.doc Last Saved On: 1/17/00 4:06 PM
Server Features 1-3
Front Panel Components
The ProLiant ML330 supports a maximum of seven internal drive bays.
Figure 1-2 and Table 1-1 show the drive configuration. Figure 1-3 and
Table 1-2 show the front panel components, including buttons and LED
indicators.
1
2
3
4
5
6
7
Figure 1-2. Identifying drive positions
Table 1-1
Drive Bay Components and Dimensions
Item Component Dimension
CD-ROM drive 5.25 inch x 1.6 inch IDE CD-ROM drive bay
Removable media bay 5.25 inch x 1.6 inch available removable media drive
bay
Removable media bay 5.25 inch x 1.6 inch available removable media drive
bay
Removable media bay 5.25 inch x 1.6 inch available removable media drive
bay
Diskette drive 3.5 inch x 1 inch 1.44-MB diskette drive bay
Hard drive bay 3.5 inch x 1 inch hard drive bay
Hard drive 3.5 inch x 1 inch hard drive bay
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: b-ch1 Server Features.doc Last Saved On: 1/17/00 4:06 PM
1-4 Compaq ProLiant ML330 Setup and Installation Guide
1
2
5
3
4
6
7
Figure 1-3. Front panel components
Table 1-2
Front Panel Components
Item Component Item Component
CD-ROM drive activity LED Power button
CD-ROM drive eject button Power LED
Diskette drive activity LED Hard drive activity LED
Diskette drive eject button
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: b-ch1 Server Features.doc Last Saved On: 1/17/00 4:06 PM
Server Features 1-5
Rear Panel Connectors
Figure 1-4 and Table 1-3 show the connectors on the rear panel of the
ProLiant ML330.
1
2
3
4
5
6
7
Figure 1-4. Identifying rear panel connectors
Table 1-3
Rear Panel Connectors
Item Connector Item Connector
Power cord Parallel port
Mouse RJ-45 Ethernet for NIC
Keyboard Video
Serial port
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: b-ch1 Server Features.doc Last Saved On: 1/17/00 4:06 PM
1-6 Compaq ProLiant ML330 Setup and Installation Guide
System Board Components
Figure 1-5 and Table 1-4 show the components and connectors on the
ProLiant ML330 system board.
14 13 15 16
12
9 17
11
8
18
10
7
19
6
20
5
21
4
22
3
2 1 24 23
Figure 1-5. Identifying system board components
Table 1-4
System Board Components
Item Component Item Component Item Component
32-bit PCI slot 6 Processor DIMM slots (four)
32-bit PCI slot 5 Serial port connector B Primary IDE connector
32-bit PCI slot 4 Parallel port connector Power button
connector
32-bit PCI slot 3 Serial port connector A Server Management
(Server Feature Board) Information Connector
(SMIC)
64-bit PCI slot 2 Mouse connector Secondary IDE
connector
64-bit PCI slot 1 Keyboard connector Remote Insight Board
(half-length) connector
Battery Power supply connector System configuration
switch (SW2)
System fan connector Diskette drive Processor speed
connector switch (SW1)
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: b-ch1 Server Features.doc Last Saved On: 1/17/00 4:06 PM
Server Features 1-7
Processors and System Memory
Pentium III processor with integrated 256-KB Cache Single
s
Processor capability
ECC for memory error detection and correction
s
64-MB, PC133-MHz ECC registered SDRAM DIMM system memory,
s
expandable to 2 GB
Support for 64-MB, 128-MB, 256-MB, or 512-MB, PC133-MHz ECC
s
registered SDRAM DIMMs
Supports up to four registered SDRAM DIMMs (PC133-MHz ECC),
s
installed one at a time in any order
Expansion Slots
Six expansion slots (five available): four 32-bit PCI slots (three
s
available) and two 64-bit PCI slots
PCI bus provides peripheral transactions at a bus clock speed of 33 MHz
s
Disk Controller
Integrated Single-Channel Ultra2 SCSI Controller on the PCI local bus.
s
The controller provides an internal SCSI bus.
Optional controller boards for controller duplexing or expanding storage
s
capacity are available.
Network Controller
Integrated PCI 10/100 Wake-On-LAN NIC
s
Ports/Connector s
Serial (2)
s
Parallel
s
Keyboard
s
Mouse
s
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: b-ch1 Server Features.doc Last Saved On: 1/17/00 4:06 PM
1-8 Compaq ProLiant ML330 Setup and Installation Guide
BIOS
ROMPaq Utility for BIOS firmware upgrade
s
BIOS Setup Utility for system configuration
s
Server Feature Board Components
Figure 1-6 and Table 1-5 show the components on the ProLiant ML330 Server
Feature Board.
2
1
3
9
8 4
7
6
5
Figure 1-6. Identifying Server Feature Board components
Table 1-5
Server Feature Board Components
Item Component Item Component
SCSI channel connector Video connector
Server Management Information Network speed indicator
Connector (SMIC)
Server Feature Board Network link status indicator
configuration switch
Replaceable lithium battery Network activity indicator
(CR2032)
RJ-45 Ethernet connector for NIC
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: b-ch1 Server Features.doc Last Saved On: 1/17/00 4:06 PM
Server Features 1-9
Interfaces
Integrated Single Channel Wide-Ultra2 SCSI Controller
s
Integrated PCI 10/100 Wake-On-LAN NIC
s
Video
Integrated ATI Rage XL Video Controller providing maximum
s
resolution of 1600 x 1200 noninterlaced at 65 K colors
Supports SVGA, VGA, and EGA graphics resolution
s
4-MB SDRAM video memory
s
Power Supply
CE Mark compliant power supply
s
Warranty
Refer to the Limited Warranty Statement included with your server
s
Server Configuration and Management
The ProLiant ML330 offers an extensive set of features and optional tools to
support effective server management and configuration, including:
BIOS Setup Utility
s
Compaq SmartStart and Support Software
s
Compaq Insight Manager
s
Diagnostic Tools (POST, DIAGS, ASR)
s
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: b-ch1 Server Features.doc Last Saved On: 1/17/00 4:06 PM
1-10 Compaq ProLiant ML330 Setup and Installation Guide
BIOS Setup Utility
The BIOS Setup Utility (or F10 setup) performs a wide range of configuration
activities, including the following:
Viewing system information
s
Selecting the operating system
s
Configuring system devices and installed options
s
Selecting the primary boot controller
s
Managing storage options
s
Backing up and restoring saved configurations
s
ROMPaq utilities to upgrade flash BIOS
s
Compaq SmartStart and Support Software
SmartStart, located on the SmartStart and Support Software CD, is the
intelligent way to set up your Compaq server. SmartStart includes:
Driver updates
s
Assisted operating system installations
s
For information concerning SmartStart, refer to the Server Setup and
Management pack included in the shipping box.
Compaq Insight Manager
Compaq Insight Manager, which is loaded from the Compaq Management CD,
is an easy-to-use software utility for collecting server information. Compaq
Insight Manager performs the following functions:
Forwards server alerts and fault conditions
s
Monitors fault conditions and server performance
s
Controls server security and configuration
s
Remotely controls server
s
Initiates rapid recovery services
s
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: b-ch1 Server Features.doc Last Saved On: 1/17/00 4:06 PM
Server Features 1-11
Diagnostic Tools
The software and firmware diagnostic tools available for your use include:
Power-On Self-Test (POST)
s
Diagnostics (DIAGS)
s
Automatic Server Recovery (ASR)
s
Security Features
Security features include:
Setup Password
s
Power-on Password
s
Diskette Drive Control
s
Diskette Write Control
s
Diskette Boot Override
s
CD Boot Override
s
Intruder Alert
s
Most security features are established through the Compaq BIOS Setup
Utility. For information concerning server security features, refer to the
SmartStart and Support Software CD included in the shipping box.
A hardware-associated security feature is the intruder alert. An intruder alert
message will display if the front bezel has been unlatched or removed.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: b-ch1 Server Features.doc Last Saved On: 1/17/00 4:06 PM
2
Chapter
Overview of Server Installation
The following instructions are provided as an overview for first-time
installation of your ProLiant ML330. If you have any problems, contact your
Compaq authorized reseller.
WARNING: To reduce the risk of electric shock or damage to the equipment:
s Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
s Plug the power cord into a grounded (earthed) electrical outlet that is
easily accessible at all times.
s Disconnect power from the server by unplugging the power cord from
either the electrical outlet or the server.
s Do not place anything on power cords or cables. Arrange them so that no
one may accidentally step on or trip over them. Do not pull on a cord or
cable. When unplugging from the electrical outlet, grasp the cord by
the plug.
CAUTION: Electrostatic discharge can damage electronic components. Be sure
you are properly grounded (earthed) before beginning any installation procedure.
See Appendix B, "Electrostatic Discharge," for more information.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: c-ch2 Overview of Server Installation.doc Last Saved On: 1/17/00 1:37 PM
2-2 Compaq ProLiant ML330 Setup and Installation Guide
Selecting a Site
Make sure that the installation area you select has the following features:
Sturdy, level installation site that includes dedicated and properly
s
grounded circuits, air conditioning, and static electricity protection
7.6-cm (3-in) clearance on all sides of server for proper ventilation
s
Separate electrical circuit for the server
s
CAUTION: Protect the server from power fluctuations and temporary
interruptions with a regulating uninterruptible power supply (UPS). This device
protects the hardware from damage caused by power surges and voltage spikes
and keeps the system in operation during a power failure.
Unpacking the Server
Unpack the server, keyboard, and cables according to the instructions and
illustrations printed on the Quick Start Poster.
Locating Materials
Locate the following materials that were shipped with your ProLiant ML330:
Keyboard
s
Mouse
s
Power cord
s
Documentation label inside the server (most of the option installation
s
and setup instructions are located on the label, which is attached to the
inside of the access panel). See Chapter 3, "Hardware Options
Installation" for instructions on removing the access panel.
Documentation and software packs inside the shipping box
s
In addition to these supplied items, you may need:
Torx T-15 screwdriver
s
Phillips screwdriver
s
Options or peripherals, such as expansion boards, monitors, uninterruptible
s
power supply (UPS), memory, or drives
Application software
s
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: c-ch2 Overview of Server Installation.doc Last Saved On: 1/17/00 1:37 PM
Overview of Server Installation 2-3
Connecting the Power Cord and
Peripheral Devices
After all internal hardware options have been installed in the server, connect
the power cord and peripheral devices to the connectors located on the rear
panel of the server as indicated in Figure 2-1 and Table 2-1. See Chapter 3,
"Hardware Options Installation," or see the options kits for detailed
instructions.
WARNING: To reduce the risk of electrical shock or fire, do not plug
telecommunications/telephone connectors into the network interface
controller (NIC) receptacle.
1
2
3
4
5
6
7
Figure 2-1. Identifying rear panel connectors
Table 2-1
Rear Panel Connectors
Item Connector Item Connector
Power cord connector Parallel port connector
Mouse connector RJ-45 Ethernet connector for NIC
Keyboard connector Video connector
Serial port connectors
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: c-ch2 Overview of Server Installation.doc Last Saved On: 1/17/00 1:37 PM
2-4 Compaq ProLiant ML330 Setup and Installation Guide
Installation Sequence
CAUTION: If your server has a factory-installed operating system, configure it
using the instructions in the following section. Otherwise, follow the instructions
in the "Operating System Purchased Separately" section later in this chapter.
Preconfigured Operating System
If you ordered your server with the factory-installed operating system,
everything required to install your operating system is already on the server.
Refer to the steps provided in the Compaq Factory-Installed Operating System
Software User Guide.
CAUTION: Use the SmartStart and Support Software CD as recovery software
only. Starting the server from the SmartStart and Support Software CD
reconfigures the system and causes all data on the server to be lost.
To install your server:
WARNING: To reduce the risk of electric shock or damage to the equipment
s Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
s Plug the power cord into a grounded (earthed) electrical outlet that is
easily accessible at all times.
s Disconnect power from the server by unplugging the power cord from
either the electrical outlet or the server.
s Do not place anything on power cords or cables. Arrange them so that no
one may accidentally step on or trip over them. Do not pull on a cord or
cable. When unplugging from the electrical outlet, grasp the cord by
the plug.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: c-ch2 Overview of Server Installation.doc Last Saved On: 1/17/00 1:37 PM
Overview of Server Installation 2-5
1. After the cables have been connected to the server, you are ready to
power up the ProLiant ML330. To power up your server:
a. Press and release the circular indentation on the left side of the
drive bay door to release the door latch.
b. Swing the drive bay door open.
c. Press the center of the power button on the front of the server.
2
1
3
Figure 2-2. Powering up the server
2. Follow the screen instructions to complete the factory-installed
operating system process.
3. Refer to Chapter 5, "Server Configuration and Utilities," and the
Compaq Management CD for information about installing the Compaq
Management Agents for your operating system.
4. After verifying your server configuration, back up your system
configuration. Refer to SmartStart and Support Software CD for further
information on backing up your system configuration.
5. Install any application software.
If you need to install additional options not preinstalled on your server, follow
the steps in Chapter 3.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: c-ch2 Overview of Server Installation.doc Last Saved On: 1/17/00 1:37 PM
2-6 Compaq ProLiant ML330 Setup and Installation Guide
Operating System Purchased Separately
If you purchased your operating system (OS) separately, you must install it
using the SmartStart and Support Software CD. Refer to the Server Setup and
Management pack for instructions on using SmartStart. The first time the
server is configured, the SmartStart program automatically creates a necessary
partition on your hard drive. This partition cannot be used for any other
purpose and is not a traditional system partition.
Follow this sequence when installing your operating system for the first time:
CAUTION: Use the SmartStart and Support Software CD as recovery software
only. Starting the server from the SmartStart and Support Software CD
reconfigures the system and causes all data on the server to be lost.
IMPORTANT: To reduce the risk of damage to your server, complete the installation
process by following the detailed procedures provided later in this chapter and in other
sections of the setup and installation guide.
1. Review all guidelines listed from the beginning of this chapter through
Step 1 of the "Preconfigured Operating System" section.
2. Run the BIOS Setup Utility by pressing F10 (when prompted) to select
F10
the type of operating system and set the date and time. For more
information on the BIOS Setup Utility, see Chapter 5, "Server
Configuration and Utilities."
3. Install the SmartStart and Support Software CD. For SmartStart and
Support Software CD initialization procedures, refer to the Server Setup
and Management pack shipped with your server or see Chapter 5,
"Server Configuration and Utilities."
4. Install Compaq Insight Manager to manage the server. For Compaq
Management CD initialization procedures, refer to the Server Setup and
Management pack shipped with your server.
5. Register your server. For server registration information, refer to the
Server Setup and Management pack shipped with your server or register
your Compaq server online at http://www.compaq.com/register. Send us your
name, server serial number, and operating system (OS) information.
You may also use your SmartStart Server Profile Diskette to register
after configuring your server with SmartStart. Simply follow the
instructions on our website and insert the SmartStart Server Profile
Diskette when prompted.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: c-ch2 Overview of Server Installation.doc Last Saved On: 1/17/00 1:37 PM
Overview of Server Installation 2-7
Configuring the Server
The BIOS Setup Utility can be used to configure the server and options. To
invoke the setup utility, press the F10 key when prompted during the startup
F10
process.
The SmartStart and Support Software CD contains the ROMPaq and updated
drivers, and assists with the operating system installation. To use the
SmartStart and Support Software CD:
1. Locate the SmartStart and Support Software CD in the Server Setup and
Management pack.
2. With your server powered up, press the CD-ROM drive eject button.
3. Insert the SmartStart and Support Software CD in the CD-ROM drive
with the labeled side up. Handle the CD by its edges, not by the flat
surfaces of the disc.
Figure 2-3. Inserting the CD
4. When the busy indicator turns green, the SmartStart sequence begins.
Refer to the SmartStart and Support Software CD for more information.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: c-ch2 Overview of Server Installation.doc Last Saved On: 1/17/00 1:37 PM
3
Chapter
Hardware Options Installation
This chapter provides procedures for installing, removing, and replacing
hardware options on the ProLiant ML330.
CAUTION: Electrostatic discharge can damage electronic components. Be sure
you are properly grounded before beginning any installation procedure.
NOTE: As a security measure, an intruder alert message will display at startup if the front
bezel has been unlatched.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 1/28/00 2:13 PM
3-2 Compaq ProLiant ML330 Setup and Installation Guide
Shutting Down the Server
Before installing or removing options, prepare your server by following these
steps:
CAUTION: Failure to follow these directions could result in damage to
equipment or loss of information.
1. Back up your server data and record configuration information.
2. Shut down the operating system, as directed in your operating system
instructions.
3. Power down the server by pressing the power button on the front of
the server.
IMPORTANT: To completely remove all power from the ML330, you must disconnect the
power cord. The front panel power button may not completely shut down power to the
server.
4. Remove the power cord.
WARNING: To reduce the risk of injury from electrical shock or damage to the
equipment when installing an upgrade, make sure that the power to the server
is turned off. Remove all AC power cords to completely disconnect power from
the system.
5. Disconnect any other external equipment connections to the server.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 1/28/00 2:13 PM
Hardware Options Installation 3-3
Removing the Front Bezel
To remove the front bezel:
CAUTION: Before removing the front bezel, make sure that the server is
powered down, all cables are disconnected from the back of the server, and the
power cord is disconnected from the grounded (earthed) AC outlet.
1. Follow the steps in "Shutting Down the Server" earlier in this chapter.
2. Push up on the latch at the bottom of the front bezel .
3. Swing the front bezel upward and slide it out and away from the
chassis.
1
2
Figure 3-1. Removing the front bezel
To replace the front bezel, reverse the above procedure.
NOTE: When replacing the front bezel, make sure the top hinge points are properly
placed in the chassis before rotating the front bezel back into its original position.
NOTE: As a security measure, an intruder alert message will display at startup if the front
bezel has been unlatched.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 1/28/00 2:13 PM
3-4 Compaq ProLiant ML330 Setup and Installation Guide
Removing the Access Panel
To remove the access panel:
WARNING: To reduce the risk of personal injury from hot surfaces, allow the
internal system components to cool before touching.
CAUTION: Before removing the access panel, make sure that the server is
powered down, all cables are disconnected from the back of the server, and the
power cord is disconnected from the grounded (earthed) AC outlet.
CAUTION: Do not operate the server with the access panel removed. This panel
is an integral part of the cooling system and removing it while the system is
running may adversely affect data integrity.
1. Remove front bezel. See "Removing the Front Bezel" earlier in this
chapter.
2. Remove the screw located on the left side of the front chassis.
3. Slide the access panel forward, pull from the top of the access panel,
then lift the panel from the chassis.
2
1
Figure 3-2. Removing the access panel
NOTE: Turn the access panel over to locate the System Configuration Label. This label
provides information about the system board on your ProLiant ML330.
To replace the access panel, reverse the above procedure.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 1/28/00 2:13 PM
Hardware Options Installation 3-5
Removing the Bezel Blanks
To remove a bezel blank from the front bezel:
CAUTION: Before removing the front bezel, make sure that the server is
powered down, all cables are disconnected from the server, and the power cord
is disconnected from the grounded AC.
1. Remove front bezel. See "Removing the Front Bezel" earlier in this
chapter.
2. On the back side of the front bezel, pinch the tabs on either end of the
bezel blank toward each other, then push the bezel blank through the
front bezel.
2
1
Figure 3-3. Removing a bezel blank
To replace a bezel blank, reverse the above procedure.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 1/28/00 2:13 PM
3-6 Compaq ProLiant ML330 Setup and Installation Guide
Removing a Drive Tray
NOTE: The drive trays in the removable media bays may be used to mount internal
3.5-inch hard drives. The rails mounted inside the drive trays may be removed, and used
to mount other devices in the removable media bays.
To remove a drive tray from a removable media bay:
CAUTION: Before removing the access panel, make sure that the server is
powered down, all cables are disconnected from the back of the server and the
power cord is disconnected from the grounded (earthed) AC outlet.
1. Follow the steps in "Removing the Access Panel" earlier in this chapter.
2. Remove the screws on either side of the drive tray.
3. Gently slide the drive tray out of the front of the chassis.
Figure 3-4. Removing the drive tray
To replace a drive tray, reverse the above procedure.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 1/28/00 2:13 PM
Hardware Options Installation 3-7
Storage Devices
This section discusses removal and replacement procedures for the storage
devices supported on the ProLiant ML330.
Drive Positions
The ProLiant ML330 supports a maximum of seven internal drive bays.
Figure 3-5 and Table 3-1 show the drive configuration.
1
2
3
4
5
6
7
Figure 3-5. Identifying drive positions
Table 3-1
Drive Bay Dimensions
Item Dimension Item Dimension
5.25 x 1.6 inch IDE CD-ROM 3.5 x 1 inch 1.44-MB diskette
drive bay drive bay
5.25 x 1.6 inch available 3.5 x 1 inch hard drive bay
removable media drive bay
5.25 x 1.6 inch available 3.5 x 1 inch hard drive bay
removable media drive bay
5.25 x 1.6 inch available
removable media drive bay
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 1/28/00 2:13 PM
3-8 Compaq ProLiant ML330 Setup and Installation Guide
Installing a Hard Drive
To install a 3.5-inch hard drive:
CAUTION: Before removing the front bezel, make sure that the server is
powered down, all cables are disconnected from the server, and the power cord
is disconnected from the grounded AC.
1. Follow the steps in "Removing the Access Panel" earlier in this chapter.
2. Disconnect the power and data cables from the back of all devices in the
hard drive compartment.
3. Remove the three shipping screws , press the tabs on either side of
the drive compartment, then pull the drive compartment from the
chassis.
2
2
1
3
1
Figure 3-6. Removing the drive compartment
4. To configure the device, set the SCSI ID. You must manually set the
SCSI ID on each device to a unique value in the range of 0 to 6 for each
SCSI bus. Refer to the documentation provided with the device for
instructions on how to set the SCSI ID.
5. Remove all terminating jumpers from third-party SCSI devices.
(Compaq SCSI cables are terminated.)
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 1/28/00 2:13 PM
Hardware Options Installation 3-9
6. Slide the drive into the drive bay, then secure with two screws on
either side of the drive compartment.
2
2
1
Figure 3-7. Installing a 3.5-inch hard drive
7. Slide the drive compartment back into the chassis.
8. Connect the power and data cables to the back of all devices.
Figure 3-8. Connecting the hard drive cables
9. Replace the access panel and the front bezel.
10. Restore power to the server.
NOTE: Using a non-Ultra2 drive impacts SCSI bus performance.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 1/28/00 2:13 PM
3-10 Compaq ProLiant ML330 Setup and Installation Guide
Removing a Hard Drive
To remove a 3.5-inch hard drive:
CAUTION: Before removing the access panel, make sure that the server is
powered down, all cables are disconnected from the server, and the power cord
is disconnected from the grounded AC.
1. Follow the steps in "Removing the Access Panel" earlier in this chapter.
2. Disconnect the power and data cables from the back of all devices in the
hard drive compartment.
Figure 3-9. Disconnecting the hard drive cables
3. Remove the three shipping screws, press the tabs on either side of the
drive compartment, then pull the drive compartment from the chassis as
shown in Figure 3-6.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 1/28/00 2:13 PM
Hardware Options Installation 3-11
4. Remove two screws on either side of the drive to be removed, then
gently pull the drive out of the drive bay.
1
1
2
Figure 3-10. Removing a hard drive
5. Slide the drive compartment back into the chassis.
6. Connect the power and data cables to the back of all devices.
7. Replace the access panel and the front bezel.
8. Restore power to the server.
Installing a Hard Drive in a Removable Media Bay
IMPORTANT: If you are installing a hard drive into a removable media drive bay, you
must use a drive tray. This drive tray can be found in the removable media bay. See
"Removing a Drive Tray" earlier in this chapter.
To install a hard drive using a drive tray:
CAUTION: Before removing the access panel, make sure that the server is
powered down, all cables are disconnected from the server, and the power cord
is disconnected from the grounded AC.
1. Follow the steps in "Removing the Access Panel" and "Removing a
Drive Tray" earlier this chapter.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 1/28/00 2:13 PM
3-12 Compaq ProLiant ML330 Setup and Installation Guide
2. Set the drive into the drive tray.
3. Tighten the screws on the bottom of the drive tray to secure the drive
into the drive tray.
1
2
Figure 3-11. Installing a hard drive into removable media bay drive tray
4. Slide the drive tray into the removable media bay, then secure with a
screw on either side of the bezel blank.
5. Connect the data and power cables to the back of all devices.
Figure 3-12. Connecting the drive cables
6. Replace the access panel and the front bezel.
7. Restore power to the server.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 1/28/00 2:13 PM
Hardware Options Installation 3-13
Installing a Tape Drive or Other Device in a
Removable Media Bay
All ProLiant ML330 models ship standard with four removable media bays.
The top 5.25-inch bay is occupied with an IDE CD-ROM drive. The remaining
three 5.25-inch bays are available for removable media devices. You can
install three half-height or one full-height and one half-height devices in these
bays.
To install a 5.25-inch device:
CAUTION: Before removing the access panel, make sure that the server is
powered down, all cables are disconnected from the server, and the power cord
is disconnected from the grounded AC.
1. Follow the steps in "Removing the Access Panel" and "Removing the
Bezel Blanks" at the beginning of this chapter.
2. To configure the device, set the SCSI device ID. You must manually set
the SCSI device ID on each device to a unique value in the range of
0 to 6 for each SCSI bus. Refer to the documentation provided with the
drive for instructions on how to set the SCSI device ID.
3. Remove all terminating jumpers from third-party SCSI devices.
(Compaq SCSI cables are terminated.)
4. Slide the device into the drive bay, then secure with screws on
either side of the device.
1
2
2
Figure 3-13. Installing a device in a 5.25-inch drive bay.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 1/28/00 2:13 PM
3-14 Compaq ProLiant ML330 Setup and Installation Guide
5. Connect the data and power cables to the back of the device, as shown
in Figure 3-12.
6. Replace the access panel and the front bezel. Restore power to
the server.
To install a tape drive:
CAUTION: Before removing the access panel, make sure that the server is
powered down, all cables are disconnected from the server, and the power cord
is disconnected from the grounded AC.
IMPORTANT: When installing a removable media device, remove the rails included in the
drive tray and install the rails on the device, replacing any existing rails on the device. The
rails are attached to the drive tray with two screws on each rail.
1. Follow the steps in "Removing the Access Panel" and "Removing the
Bezel Blanks" at the beginning of this chapter.
2. To configure the device, set the SCSI device ID. You must manually set
the SCSI device ID on each device to a unique value in the range of
0 to 6 for each SCSI bus. Refer to the documentation provided with the
drive for instructions on how to set the SCSI device ID.
Compaq Confidential Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 1/28/00 2:13 PM
Hardware Options Installation 3-15
3. Slide the drive into the drive bay, then tighten the screws on either side
of the device.
Figure 3-14. Installing a tape drive
4. Connect the data and power cables to the back of the drive, as shown in
Figure 3-12.
5. Remove the two bezel blanks in the front bezel in front of the tape drive.
| 173868-001
199618-001
|
